Wishon Clubs - Custom fit only

Prices vary according to shaft and grip choices

STRATUS

• easy to hit and confidence-building, the Stratus irons are an especially good choice for the mid to high handicapper and for the lady golfer who wants a blade size that is slightly larger than what has become the “norm” in iron design today.

• Precision investment cast, game improvement iron has a large size blade and deep cavity making the Stratus iron design extremely forgiving in shots hit off-centre.

• Stratus irons possess a full progressive offset hosel design with a hosel position advancement that ranges from 7mm to 4mm in order to push the centre of gravity farther behind the shaft for a higher launch angle for each specifc loft angle. This significant progression maximizes the ball’s carry distance and provides a better launch angle, greater distance and improved accuracy, especially for players with 5-iron swing speeds of 55mph to 70mph.

• Stratus irons incorporate a wide “Smart-Sole” design for ensuring a lower centre of gravity, but the design also substantially raises the front and back edges [leading and trailing edges] of the iron to reduce the golfer’s chance of accidentally “catching “ the turf.

WISHON 991C

• Classic profile shape design and a deep cavity-cut back highlight a technologically advanced set of irons dedicated to real game improvement. Elevating game improvement models to the high-end of the high-tech ladder, the new 991c irons by Tom Wishon Golf Technology brings full game improvement design through close attention to head size, offset progression, sole width and shape, and a deep cavity back feature with toe and heel, rear back pad weighting.

• Investment cast from 431 stainless steel, the new Wishon 991c feature a deep cavity-back design that is slightly oversized to enhance playability, yet possess a medium-thin topline width for a balanced appearance at address. The 991C also has additional sloped cavity weighting which gently curves into the heel and toe weighted back pad and keeps the irons’ CG lower for high performance on off-centre hits. Although the 991C irons can be played and enjoyed by low handicap players, the 991C iron design’s offset, cavity weighting and sole design makes it an especially good design for golfers with handicaps over 12.

• The 991C irons are designed with a full complement of matching wedges [ PW, 51, 55, 59 ] for every short game and no gaps in yardage.

• Sole is cambered from front to back in a custom dual radius that is specially designed to ensure the same sole curvature along the length of each sole, and to allow for sole width changes through the set.

• Available 3 to PW, AW-51, SW-55, LW-59, right hand only

WISHON 770CFE
     

Variable thickness thin-face technology combined with variable face materials within a single set of irons – it’s another Tom Wishon first in the golf industry!

The Wishon 770CFE irons feature unique CNC-machined, varible-thickness, thin-face iron design which utilizes three different steel alloys to match the distinct performance needs of the long, middle and short irons within the set. Variable face thicknesses generate a higher ball speed-to-swing ratio for the golfer, and as loft increases through the set, the face material changes to match the loft and face deflection capability, as well as the impact feel.

• 3, 4- irons – Face features Carpenter 455 high strength steel to maximize performance and feel for lofts of 24 deg. and lower.

• 5, 6 and 7 irons – Face uses 17-7 stainless steel, much higher strength than 431 or 17-4, but lower than C455 to maximize face performance and feel for lofts within the 27 deg. to 35 deg. range.

• 8, 9, PW, SW – Face features soft 304 stainless steel which is comparable in strength and hardness to carbon steel to maximize face performance and soft feel for the scoring clubs’ range of loft between 39 deg. and higher.

• Right hand only

• Winner of the 2004 “Top Concept” Award Golf Tips Magazine

• Winner of “Best Iron from a New Company” Award Golf Digest The Hot 20 List 2005

WISHON 550C

• Forged irons that have been custom-ground by Tom Wishon have won several million dollars on the PGA Tour, and the 550 forged irons are undoubtedly the best forged carbon steel iron sets Wishon has ever designed.

• The 550C is a true forged cavity with real perimeter weighting enhancement created by a deep forged cavity, carbon steel forging that maintains a strong, traditional look in the playing position.

• A very slight amount of offset which progresses for each head creates the preferred “look” in the address position – not 0 or 0.5mm. This is one key to the perfect look for these true forgings in the playing position.

• Billet forged irons 1035C Mild Carbon Steel- unlike most forgings which undergo four forging press operations before grinding, the 550C is pressed in a fifth forging to compact the steel tighter, thus ensuring grain consistency and increasing density.

• Available 2 to PW, AW-52, SW-55, right hand only.

WISHON HYBRID

• Designed to be a true easy-to-hit replacement for traditional long irons, the 321LI Hybrid Long Irons show-case totally innovative engineering from TWGT to finally create a true hybrid that is extremely easy-to-hit shots that carry the distance.

• Custom wall thickness engineering moves the CG farther back of the shaft and lower to maximize the forward bending of the shaft for higher flight. While, a unique hosel and leading edge design makes the 321LI set up to the ball just like a true iron.

• 321LI hybrid irons 1-iron through 6-iron available in RH; 2-iron, 3-iron and 4-iron also in LH.

WISHON 915CFE

• With advanced clubface technology, superior face material and innovative design, the Wishon Series 9 drivers and fairway metals are Tom Wishon Golf Technology’s signature line of metalwoods. There’re very forgiving and extremely hot!

• 360cc and 420cc drivers feature forged Beta Titanium face designs, each incorporating variable face thickness that have been CNC-machined. Each clubface is Computer-Face Engineered [ aka’CFE’ ] on a proprietary Finite Element Analysis [FEA] program to precisely match its material, construction and thickness to the clubhead’s loft, volume and face area.

• 915CFE driver faces are engineered from forged 10-2-3 titanium alloy, the highest-quality Beta Ti for strength-to-weight, as well as in elasticity-to-strength ratio. Combining the benefits of Beta Ti with a front, flat topline that ‘braces’ the clubface and heightens the energy transfer at impact, 915CFE metalwoods approach the maximum COR [0.83/239ms] allowed by the R&A.

• 915CFE High Launch driver features a special design that provides higher launch parameters to fully maximize carry distance. The 915CFE High Launch driver satisfies many players’ need for more distance, including: golfers with swing speeds of less than 90mph who have a downward or level angle of attack; golfers with a swing speed of 90-100mph who have a downward angle of attack; and golfers who currently hit the driver on a low trajectory.

• Fairway metals are larger in volume [cc] than typical woods to provide more perimeter-weighted forgiveness. The 3-metal features a 6/4 titanium forged-face with CNC-machined, varible-thickness face. The 5- and 7 – metals feature forged clubfaces made of Carpenter 455tm, one of the highest-quality, high strength steels in golf.

• 360cc and 420cc drivers, 3 and 5 metals available in RH and LH, 7-metal in RH only

WISHON 715CLC  

The golf industry's ultimate weight adjustment design is for any golfer who wishes to slightly adjust the flight of the ball with the driver for more flight and control consistency.

Internal weight arm can be "dialed" to any desired flight position.

Position 1 - lower flight / reduced draw

Position 2 - lower flight / lower spin

Position 3 - lower flight / reduced fade

Position 4 - higher flight / reduced fade

Position 5 - higher flight / higher spin

Position 6 - higher flight / reduced draw

Go to Acer